Astra L4-1.8L (2009)
7. Remove the interior paneling.
*
Remove the bolt (1).
*
Remove the paneling.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the interior paneling.
Insert the paneling.
Tighten the bolt to 2.5 Nm (22 lb in).
Note: Connect the wiring harness plug.
2. Install the front seat.
Insert into the front guide.
3. Install the front seat, rear.
Tighten the 2 bolt to 35 Nm (26 lb ft).
4. Reposition the seat to the original position.
5. Install the seat belt at the front seat.
Tighten the bolt to 20 Nm (15 lb ft).
6. Install the seat belt fastening panel.
7. Connect the battery.
8. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).