Astra L4-1.8L (2009)
Tighten the battery positive connection nut to 5 Nm (44 lb in).
4. Install the battery ground connection to the ground terminal.
Tighten the battery ground connection nut to 5 Nm (44 lb in).
5. Bleed the brake system. Refer to Hydraulic Brake System Bleeding (See: Brake Bleeding/Service and Repair).
6. Top up the brake fluid reservoir to the MAX marking.
7. Install the cover onto the brake fluid reservoir.
8. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
