Astra L4-1.8L (2009)
Installation Procedure
1. Install the 2 valves, camshaft position actuator solenoid.
*
Insert the 2 camshaft position actuator solenoid valves all the way.
*
Coat the seal rings with clean engine oil.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
*
Tighten the 2 bolts.
Tighten the 2 bolts to 6 Nm (53 lb in).
*
Connect the 2 wiring harness plugs.
2. Connect the wiring harness to the cylinder head.
3. Inspect the engine oil level and correct if necessary.
4. Close the hood.