Astra L4-1.8L (2009)
1. Insert the 16 cup tappets with KM-845 .
Lightly coat sliding surfaces with oil.
2. Install the intake camshaft.
*
Coat with MoS 2 lubricating paste.
Note: Note the identification marking on the camshaft bearing cover.
*
Insert the camshaft.
*
Install the camshaft bearing cover.
*
Tighten the camshaft bearing caps 2-5 in a spiral from the inside to the outside.
Tighten the camshaft bearing caps to 8 Nm (70 lb in).
3. Install the exhaust camshaft.
*
Coat with MoS 2 lubricating paste.
