Astra L4-1.8L (2009)
Note: Inspect markings on parts.
15. Install con-rod bearing covers 1 and 4 (1).
*
Wet the con-rod bearing journal with engine oil.
*
Renew the bolts.
Tighten the 4 bolts to 35 Nm (26 lb ft) plus 45 degrees plus 15 degrees.
*
Set the crankshaft in the direction of the engine rotation to 60 degrees before OT.
16. Install the oil pan. Refer to Oil Pan Replacement (See: Engine Lubrication/Oil Pan/Service and Repair).
17. Install the cylinder head. Refer to Cylinder Head Replacement (See: Cylinder Head Assembly/Service and Repair).
