Astra L4-1.8L (2009)
9. Attach the MKM-6086-7 lever arm (3).
*
Complete the lever arm with the MKM-6086-8 joint (1) and the MKM-6086-11 removal head (2).
Note: Removal head must point toward the intake side.
*
Slide assembly on installation shaft over the 1st cylinder
10. Remove the intake valve springs, 1st cylinder.
Note: Removal head must be positioned vertically over the valve stem.
*
Carefully push the valve springs down using the lever arm MKM-6086-7.
Note: Observe correct assignment.
*
Remove the valve keepers.