Astra L4-1.8L (2009)
Engine Mount: Service and Repair
Engine Front Mount Replacement
Engine Front Mount Replacement
Removal Procedure
1. Raise the vehicle by its full height.
2. Remove the engine front mount.
*
Remove the 2 bolts (1).
*
Remove the screwed connection (2).
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the engine front mount.
Use new nuts.
*
Tighten the screwed joint to 55 Nm (40 lb ft).
*
Tighten the 2 bolts to 80 Nm (59 lb ft).
2. Lower the vehicle.