Astra L4-1.8L (2009)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator Tube Replacement
Removal Procedure
1. Open the hood.
Warning: Refer to Battery Disconnect Warning (See: Starting and Charging/Battery/Service Precautions).
2. Disconnect the battery.
*
Detach the negative connection from the negative terminal.
*
Loosen the nut.
3. Remove the oil level indicator guide tube (2).
*
Remove the bolt (1).
*
Remove the oil level indicator.
4. Raise the vehicle by its full height.
Note: If the engine oil level is at maximum, some oil may emerge when drawing out the oil level indicator guide tube
5. Place a drain pan underneath.
6. Remove the oil level indicator guide tube.
Installation Procedure
1. Insert the oil level indicator guide tube.
Use a NEW gasket.
2. Lower the vehicle by its full height.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the oil level indicator guide tube.
Tighten the bolt to 8 Nm (71 lb in).
Insert the oil level indicator.
4. Connect the battery.
Attach the negative connection to the negative terminal.
