Astra L4-1.8L (2009)
Note: Threading the toothed belt through the engine damping block support is only permissible in conjunction with the assembly tool supplied
with new toothed belts as otherwise it is possible to damage the toothed belt at this stage by kinking it.
1. Insert the toothed belt.
*
Insert the toothed belt (1) in enclosed assembly tool (2).
If the toothed belt has been used, observe direction of rotation.
*
Guide the toothed belt through the engine damping block support with assembly tool.
*
Remove the assembly tool.
Note: Observe the direction of rotation.
2. Position the toothed belt.
*
Place the toothed belt on the intake camshaft adjuster.
*
Place the toothed belt on the exhaust camshaft adjuster.
*
Guide the toothed belt past the tension roller and place on the toothed belt drive gear.
