Astra L4-1.8L (2009)
*
Install the positive connection to the positive terminal.
Tighten the nut to 5 Nm (44 lb in).
10. Install the positive cable to the positive terminal.
Tighten the bolt to 5 Nm (44 lb in).
11. Connect the battery.
Install the ground connection to the ground terminal.
Tighten the nut to 5 Nm (44 lb in).
12. Fill and bleed the cooling system. Refer to Cooling System Draining and Filling (See: Cooling System/Service and Repair).
13. For reprogramming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
14. Close the hood.
