saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Condenser HVAC|Service and Repair|Page 9938 > < Compressor Clutch Relay|Locations|Page 9934
Page 1
background image

Condenser HVAC: Service and Repair

Air Conditioning Condenser Replacement

Removal Procedure

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging   (See: Service and Repair/Refrigerant Recovery and Recharging). 

2. Disconnect the wiring harness plug for pressure sensor (2). 

Release and disconnect the wiring harness plug. 

3. Detach the refrigerant lines from condenser. 

Remove the 2 bolts (3, 6). 

4. Remove the condenser. 

*

Cut the 4 cable ties (5). 

*

Remove the 4 bolts (1, 4).

Note:  Only when replacing the condenser.

5. Remove the pressure sensor. 

Installation Procedure

Condenser HVAC|Service and Repair|Page 9938 > < Compressor Clutch Relay|Locations|Page 9934