saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Evaporator Drain Tube > < A/C - Musty Odors Emitted From (HVAC) System|Page 9980
Page 11
background image

14. Install the block connector. 
15. Use new seal rings, before installation moisten only green colored seal rings with mineral oil and insert. 

Tighten the block connector bolt to 7 Nm (62 lb in).

16. Install the air duct for footwell right side. 

Connect the clip. 

17. Install the I/P compartment. 
18. Connect the wiring harness plug. 

Tighten the 4 bolts to 4 Nm (35 lb in).

19. Install the insulator panel. 

Tighten the 2 retainers.

20. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging   (See: Service and Repair/Refrigerant Recovery and Recharging). 

Evaporator Drain Tube > < A/C - Musty Odors Emitted From (HVAC) System|Page 9980