saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Heater Core|Service and Repair|Page 9998 > < Heater Core|Service and Repair|Page 9996
Page 7
background image

Tighten the 8 bolts to 6 Nm (53 lb in). 

5. Install the right center console bracket. 

Tighten the 2 bolts to 13 Nm (113 lb in). 

6. Install the air duct rear footwell. 
7. Install the front floor console. Refer to Front Floor Console Replacement   (See: Body and Frame/Interior Moulding / Trim/Console/Service and

Repair).

8. For vehicles equipped with an insulator, attach the air duct housing to the dash outside.

Tighten the 8 bolts to 6 Nm (53 lb in). 

9. For vehicles equipped with an insulator, fit the air inlet screen. 

1. Attach the screen washer hose. 
2. Clip in the 5 clips. 

Note:  Ensure the windshield wiper arms are correctly positioned. 

10. For vehicles equipped with an insulator, install the windshield wiper arms. 

1. Install the 2 wiper arms to the shaft. 
2. Install the 2 washers.

Tighten the 2 nuts to 17 Nm (13 lb ft).

3. Install the 2 cover caps.

11. For vehicles equipped with an insulator, install the air inlet screen. 

Heater Core|Service and Repair|Page 9998 > < Heater Core|Service and Repair|Page 9996