Astra L4-1.8L (2009)
3. Install a new seal at the compressor hose joint.
4. Connect the evaporator hose to the compressor hose.
Tighten the bolt to 20 Nm (15 lb ft).
5. Install a new seal at the condenser.
6. Install the compressor hose (1) to the condenser.
Tighten the bolt to 20 Nm (15 lb ft).
7. Recharge the refrigerant system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and Recharging).