Astra L4-1.8L (2009)
7. For vehicles equipped with air conditioning (A/C), disconnect the wiring harness plug for the recirculating air valve (1) servo motor. Detach and
remove the recirculating air valve housing (2).
1. Remove the 2 bolts (3).
2. Disconnect the wiring harness plug.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. For vehicles equipped with A/C, connect the wiring harness plug for recirculating air valve servo motor.
Insert and tighten the recirculating air valve housing.
Tighten the 2 bolts to 5 Nm (44 lb in).
2. Install the heater fan motor.
1. Connect the clip.
2. Install the 5 bolts.
3. Connect the 2 wiring harness plugs.
3. Install the air duct.
Install the body-bound rivet.