saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Tail Lamp Wiring Harness Replacement (Coupe)|Page 12914 > < Lighting - Exterior Lamp Condensation and Replacement|Page 12911
Page 1
background image

Tail Lamp: Service and Repair
Tail Lamp Wiring Harness Replacement (Coupe)

Tail Lamp Wiring Harness Replacement (Coupe)

Removal Procedure

Warning:  Refer to Battery Disconnect Warning   (See: Starting and Charging/Battery/Service Precautions).

Note:  Replace or repair the wiring harnesses observing the safety regulations of electrics/electronics.

1. Disconnect the battery.
2. Remove the rear compartment, side trim panel, both sides. Refer to Rear Compartment Side Trim Panel Replacement (Coupe)   (See: Body and

Frame/Interior Moulding / Trim/Trim Panel/Service and Repair)Rear Compartment Side Trim Panel Replacement (Sedan)   (See: Body and
Frame/Interior Moulding / Trim/Trim Panel/Service and Repair).

3. Remove the wiring harness, rear end panel.

*

Disconnect the 7 wiring harness plugs.

*

Disconnect the ground connection.

*

Remove the nut.

*

Release the 16 clips.

Tail Lamp Wiring Harness Replacement (Coupe)|Page 12914 > < Lighting - Exterior Lamp Condensation and Replacement|Page 12911