Astra L4-1.8L (2009)
Fuse Block: Service and Repair
Rear Electrical Center or Junction Block Replacement (Sedan)
Rear Electrical Center or Junction Block Replacement (Sedan)
Removal Procedure
Note: When replacing the control unit, before removing the control unit, carry out a "Reset" with TECH 2. Refer to Control Module References (See:
Testing and Inspection/Programming and Relearning).
Warning: Refer to Battery Disconnect Warning (See: Starting and Charging/Battery/Service Precautions).
1. Disconnect the battery.
2. Open the service flap.
3. Disconnect the wiring harness plug for the rear electrical center.
Disconnect the 6 wiring harness plugs (1, 3).
4. Release the rear electrical center.
Remove the nut (arrow).
Note: Only for vehicles with park pilot control unit.