saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Information Bus > < Engine Controls - MIL ON/DTC P0116/P0128, or P2097|Page 3743
Page 9
background image

14. Install the right rear wheel housing inner paneling.

*

Tighten the 2 rear wheel housing inner paneling nuts to 2.5 Nm (22 lb in).

*

Tighten the 2 rear wheel housing inner paneling bolts to 2.5 Nm (22 lb in).

15. Mount the right rear wheel.
16. Lower the vehicle halfway.
17. Install the right rear wheel.

Tighten the right rear wheel bolt to 110 Nm (81 lb ft).

18. Connect the battery. 

Connect the ground clamp to the ground terminal.

Tighten the ground clamp nut to 5 Nm (44 lb in).

19. For programming procedures, refer to Control Module References   (See: Testing and Inspection/Programming and Relearning).
20. Close the hood.

Information Bus > < Engine Controls - MIL ON/DTC P0116/P0128, or P2097|Page 3743