saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Intake Air Temperature Sensor > < Fuel System - MIL ON/DTC P0451/P0452/P0453 or P0454|Page 3198
Page 9
background image

14. Install the right rear wheel housing inner paneling.

*

Tighten the 2 rear wheel housing inner paneling nuts to 2.5 Nm (22 lb in).

*

Tighten the 2 rear wheel housing inner paneling bolts to 2.5 Nm (22 lb in).

15. Mount the right rear wheel.
16. Lower the vehicle halfway.
17. Install the right rear wheel.

Tighten the right rear wheel bolt to 110 Nm (81 lb ft).

18. Connect the battery. 

Connect the ground clamp to the ground terminal.

Tighten the ground clamp nut to 5 Nm (44 lb in).

19. For programming procedures, refer to Control Module References   (See: Testing and Inspection/Programming and Relearning).
20. Close the hood.

Intake Air Temperature Sensor > < Fuel System - MIL ON/DTC P0451/P0452/P0453 or P0454|Page 3198