Astra L4-1.8L (2009)
3. Fasten the front seat backrest paneling.
*
Install the 2 clamps.
*
Fasten the paneling all round.
Note: Connect the wiring harness plug.
4. Install the front seat.
Insert into the front guide.
5. Install the rear front seat.
Tighten 2 bolts 35 Nm (26 lb ft).
6. Reposition the seat to its original position.
7. Install the seat belt at the front seat.
Tighten the bolt 20 Nm (15 lb in).
8. Install the seat belt trim panel.
9. Connect the battery.
10. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
