Astra L4-1.8L (2009)
*
Loosen the 2 bolts (1).
*
Remove the airbag sensor from the guide.
*
Disconnect the wiring harness plug (2).
Installation Procedure
1. Install the airbag sensor.
*
Connect the wiring harness plug.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
*
Insert the airbag sensor in the guide.
Tighten the 2 bolts to 6 Nm (53 lb in).
2. Install the upper radiator grille. Refer to Front Bumper Upper Fascia Grille Replacement (See: Body and Frame/Bumper/Front Bumper/Front
Bumper Cover / Fascia/Service and Repair/Front Bumper Upper Fascia Grille Replacement).
3. Connect the battery.
4. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).