Astra L4-1.8L (2009)
4. Remove the airbag sensor.
*
Remove the 2 bolts (1).
*
Disconnect the wiring harness plug and remove the sensor.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the airbag sensor.
Insert the sensor and connect the wiring harness plug.
Tighten the 2 bolts to 6 Nm (53 lb in).
2. Install the resonator.
Insert the resonator into the guide.