Astra L4-1.8L (2009)
2. Remove the front height adjuster.
Remove the 2 bolts (1).
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the front height adjuster.
Tighten the 2 bolts to 20 Nm (15 lb ft).
2. Install the upper center pillar trim panel.
*
Guide the center pillar trim panel from above in the inner paneling guide front of the rear quarter panel.
*
Install the upper center pillar trim panel.
Install the panel.
Tighten the seat belt bolt on the center pillar to 30 Nm (22 lb ft).
*
Install the cover cap.