Astra L4-1.8L (2009)
*
Insert and position the rear compartment side trim panel.
*
Install the 2 clips.
Tighten the 3 bolts in the rear compartment side trim panel to 2.5 Nm (22 lb in).
5. Install the upper center pillar trim panel.
*
Install the 3 center pillar inner paneling clips.
Tighten the center pillar seat belt bolt to 35 Nm (26 lb ft).
*
Install the cover cap.
6. Install the rear quarter panel front inner paneling.
Install the 8 inner paneling at the front of the front quarter panel.
*
Tighten the bolt on the upper center pillar trim panel to 20 Nm (15 lb ft).
*
Tighten the bolt to the rear seat backrest to 35 Nm (26 lb ft).
*
Tighten the bolt on lower center pillar trim panel to 25 Nm (18 lb ft).
*
Install the rear quarter panel front inner paneling cover cap.
*
Install the seat belt with striker.
*
Install the seat belt strap guide bushing in front quarter panel inner paneling.
*
Install the lower seat belt striker.
Tighten the lower seat belt bolt to 20 Nm (15 lb ft).
7. Install the upper center pillar trim panel.
*
Guide the upper center pillar trim panel from above in the front quarter panel inner paneling guide.
*
Install the upper center pillar trim panel.
*
Press in the panel.
Tighten the seat belt bolt to upper center pillar trim panel to 20 Nm (15 lb ft).
*
Install the cover cap.
8. Insert the rear seat backrest.
9. Install the rear seat backrest.
*
Guide in and position the rear seat backrest with guide pins right and left in the rear quarter panel.
Tighten the 4 rear bolts to 35 Nm (26 lb ft).
*
Fold down the rear seat backrest.
*
Insert the 3 belt buckles.
Tighten the 4 bolts at the front rear seat to 20 Nm (15 lb ft).
10. Install the bench seat.
*
Support the 2 seats in the rear brackets.
Tighten the rear bracket bolts to 20 Nm (15 lb ft).
*
Push the seat simultaneously backwards and down.
*
Bolt the 2 brackets front.
11. Install the rear end inner paneling.
Install the 7 clips.
12. Install the additional storage space under the load compartment carpet.
13. Install the trailer hitch ball head.
*
Thread the seat belt through eye.
*
Insert the ball.