Astra L4-1.8L (2009)
*
Fold down the rear seat backrest.
*
Insert 3 belt buckles.
Tighten the 4 front bolts to 35 Nm (25 lb ft).
6. Install the bench seat.
*
Position the 2 seats in the rear bracket.
*
Push the seat simultaneously backwards up and down.
*
Bolt the 2 front brackets.
7. Connect the battery.
8. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
9. Perform the readiness inspection.
After ignition ON, the airbag system readiness indicator illuminates for 4 seconds and then goes out.