Astra L4-1.8L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the seat frame.
Tighten the 4 bolts to 25 Nm (18 lb ft).
4. Route the seat heating cable.
*
Route the seat heating wiring harness.
*
Insert the wiring harness into grooved tube.
*
Connect the wiring harness plug into the compact plug.
*
Install the 2 wiring harness.
*
Install the 5 cable ties.
5. Install the front seat backrest.
Tighten the 4 bolts to 35 Nm (26 lb ft).
6. Install the seat heater wiring harness.
*
Connect the wiring harness plug.
*
Install the 3 cable ties.
7. Install the side airbag wiring harness.
Install the 2 clips.
Note: Ensure the correct wiring harness routing.
8. Install the side airbag.
Connect and latch the wiring harness plug.
Tighten 3 nuts 5 Nm (44 lb in).
9. Install the front seat back upholstery covering.
*
Install the 2 clamps.
*
Insert the upholstery covering into guide all around.
10. Install the inner panel.
Insert the panel.
Tighten the bolt to 2 Nm (18 lb in).
11. Install the outer panel.
Insert the panel.
Tighten the 2 bolts to 2 Nm (18 lb in).
12. Install the rear seat backrest star handle.
Install the adjusting wheel.
13. Install the height adjuster.
Tighten the 2 bolts to 35 Nm (26 lb ft).
14. Install the height adjuster panel.
Install the panel.
15. Install the front seat.
*
Connect the wiring harness plug.
*
Insert into the front guide.
16. Install the front seat, rear.
Tighten the 2 bolts to 35 Nm (26 lb ft).
