Astra L4-1.8L (2009)
10. Remove the center nut of the generator pulley.
Note
The pulley nut is threaded counterclockwise (left hand thread).
11. Install the new pulley, GM P/N 55560294, on the generator, finger tight.
12. Using SPX Kent-Moore tool 8395923, insert the black tool into the center of the generator. Hold with a 15 mm wrench (2). Then use a ratchet and
tighten the nut with the special TORX(R) socket that comes with the tool (1).
Tighten
Tighten the nut to 80 Nm (59 lb ft).
Please contact GM-TOOLS for pricing information or to place your order for this tool (8395923).
Saturn/Saab retailers in Canada: Tool 8395923 was previously shipped as a Saab tool.
13. Reattach the generator bolts.
Tighten
Tighten the two bolts to 35 Nm (25 lb ft).