Astra L4-1.8L (2009)
2. Install the actuating lever.
*
Engage the actuating lever.
*
Install the rubber sleeve in the steering column paneling.
3. Install the lower steering column paneling.
*
Insert the ignition lock rosette.
Tighten the 5 screws to 1 Nm (9 lb in).
*
Install the rubber sleeve in the steering column paneling.
4. Install the steering wheel. Refer to Steering Wheel Replacement (See: Steering/Steering Column/Service and Repair/Steering Wheel
Replacement).
Note: When replacing the control unit, before removing, carry out a Reset using the Tech 2. Refer to Control Module References (See: Testing
and Inspection/Programming and Relearning).
5. Connect the battery.
6. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).