Astra L4-1.8L (2009)
3. Align the rear axle by using the previously marked bolt locations.
4. Tighten the 6 new bolts on the rear axle bracket on the vehicle underbody.
Tighten the rear axle bracket bolts on the vehicle underbody to 90 Nm (67 lb ft), plus 30 degrees, plus 15 degrees.
5. Raise the rear axle with hydraulic lift table until a distance of I=173±10 mm is achieved between the spring mounts at the rear axle and the spring
mounts at the vehicle underbody.
• Distance has to be adjusted on both sides.
