Astra L4-1.8L (2009)
3. Press out the bushing.
4. Remove the bushing from MK-6005-A .
Installation Procedure
Important:
*
Ensure the nut from MKM-6615-10 -13 (6) is correctly seated.
*
The arrow in the illustration shows the direction for pressing out.
1. Position the new bushing using the special tool.
*
Attach the MK-6005-A (3) to MKM-6615-10 -11 (1) in conjunction with MKM-6615-10 -12 (2).
*
Toothing of MK-6005-A (3) must engage with toothing of damping bushing (4).
*
Place MK-6005-A (5) on MKM-6615-10 -11 (1) in conjunction with MKM-6615-10 -12.
*
Tighten with MKM-6615-10 -13 (6).
Important:
*
Note any excessive rise in pressure in the pressure gage of MKM-6616 . Inspect the installation position of the special tool. Maximum
loading of the hydraulic thrust rod MKM-6615-10 -10 (1)70 kN or 260 bar.
*
Coat bushing with silicone grease.
2. Press in bushing.
3. Remove the special tool assembly.
4. Install the lower control arm. Refer to Lower Control Arm Replacement (See: Service and Repair).
