Astra L4-1.8L (2009)
*
Adapt bracket for sump and tighten the bolts to 25 Nm (18 lb ft).
9. Install the lower engine compartment cover. Tighten the 8 bolts to 5 Nm (44 lb in).
10. Install the left and right engine compartment covers.
*
Insert the 2 body blind rivet.
*
Tighten the 2 bolts to 5 Nm (44 lb in).
11. Release the vehicle.
12. Place the rubber sleeve on the steering gear.
Note: Before inserting the clamping screw, make sure that the steering shaft slot is flush with the intermediate shaft hole.
13. Push the intermediate shaft onto the steering gear shaft.
Note: Clean thread and screw in bolt with locking compound.
14. Install clamping screw on intermediate shaft and tighten to 24 Nm (17 lb ft).
