Astra L4-1.8L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the stabilizer shaft links to the stabilizer.
Tighten the nuts to 55 Nm (40 lb ft).
*
Use the 2 new nuts.
*
Counterhold at the two flattened areas of the knuckle bolt with open-ended wrench.
2. Install the stabilizer shaft links to spring strut support tube.
Counterhold at the two flattened areas of the knuckle bolt with open-ended wrench.
Tighten the bolt to 55 Nm (40 lb ft).
3. Install the front wheel.
Tighten the bolt to 110 Nm (81 lb ft).
