Astra L4-1.8L (2009)
7. Remove the spring strut.
Installation Procedure
1. Install the spring strut to wheel housing.
*
Replace the spring strut in wheel housing.
*
Install the new retaining ring (1) with the KM-6384 (2).
*
Install both halves of retaining ring by hand.
*
Compress the halves of retaining ring together with KM-6384 .
Note: Insert the bolts from front. Tightening to torque does not take place until camber has been adjusted.
2. Install the spring strut to the steering knuckle.
*
Insert 2 new screwed joints
*
Use the 2 new bolts.