Astra L4-1.8L (2009)
Wheel Bearing: Service and Repair
Front Suspension
Front Wheel Bearing and Hub Replacement
Special Tools
J 28733-B /KM-6610 and KM-956-1 Front/Rear Spindle Remover
Removal Procedure
1. Remove the front wheel.
2. Remove the brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Front Brake Rotor Replacement).
3. Remove the nut from the axle shaft.
Counter-hold against the wheel hub with holding wrench J 28733-B /KM-6610 and KM-956-1.
4. Disconnect the wiring harness plug (1) for wheel sensor.
Note: Pay attention to installation position of wheel bearing unit and cover plate.
5. Remove the wheel bearing unit.
*
Detach the 3 bolts (2).
*
Pull the wheel bearing unit (4) with the cover plate (3) from the steering knuckle and axle shaft.