Astra L4-1.8L (2009)
Installation Procedure
1. Connect the selector lever position switch wiring harness plug.
*
Disconnect KM-962-A from the selector lever position switch wiring harness plug.
*
Disconnect KM-962-A from KM-962-10.
*
Disconnect KM-962-A from the battery.
*
Lock the wiring harness plug.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the battery support.
Fasten the cable tie.
Tighten 3 bolts 10 Nm (89 lb in).