saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Procedures|Page 6521 > < Procedures|Page 6519
Page 4
background image

6. Remove the range selector cable from the transmission.

*

Remove from the selector lever position switch.

*

Remove from the bracket on the transmission.

*

Remove the retaining clamp (1).

7. Remove the range selector cable from the wiring harness.

Release the 2 brackets (2).

Note:  Do not remove rubber seal from the dash.

8. Remove the range selector cable from the rubber seal (3).

Installation Procedure

Procedures|Page 6521 > < Procedures|Page 6519