Astra L4-1.8L (2009)
*
Disconnect the fastening sleeve for the pressure line.
Carefully disengage the retaining lugs (3).
*
Remove the pressure line.
Note: Replace the damaged components.
4. Inspect all parts for damage.
Installation Procedure
Note:
*
Note seating and condition of the O-ring (2). Damage to or absence of the O-ring leads to leaks.
*
The lug (arrow) on the sleeve must sit in the groove in the clutch housing.
1. Install the fastening sleeve for the pressure line (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
