Astra L4-1.8L (2009)
1. Fill up with the recommended transmission fluid. Refer to Lubrication Specifications (See: Specifications/Fluid Type Specifications/Lubrication
Specifications).
2. Add fluid through the back up lamp switch opening.
3. Fill up with transmission fluid until it emerges at the inspection opening.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Tighten the fluid inspection bolt.
Tighten the bolt to 4 Nm (35 lb in) plus 45-135 degrees.