Astra L4-1.8L (2009)
5. Lock the selector lever link shaft in the transmission cover.
*
Turn the selector lever link counterclockwise.
Direction of the 3rd gear
*
Engage the locking pin (1) in the adjusting bore in the transmission cover (arrow).
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Do not change the position of the gearshift rod.
1. Install the selector lever link.
Tighten the bolt (1) to 12 Nm (106 lb in) plus 180-225 degrees.