Astra L4-1.8L (2009)
7. Disconnect the selector lever from the universal joint.
*
Press in retaining spring (arrow) of the hollow pin (3).
*
Detach the hollow pin with KM-569-A .
Installation Procedure
Important: Use new retaining clamps.
1. Connect the transmission rocker arm to the relay point bracket.
Connect the 2 retaining clamps (1, 2) to the transmission rocker arm.
Important: Use a new hollow pin. Retaining spring (arrow) of hollow pin (3) must engage.
2. Connect the selector lever to the universal joint.
Connect a hollow pin.
3. Connect the selector lever to relay point.