Astra L4-1.8L (2009)
Shifter M/T: Service and Repair
Transmission Control Lever Boot Replacement
Transmission Control Lever Boot Replacement
Removal Procedure
1. Position the transmission control lever into 4th gear.
2. Release the bolt (1) for the relay point clamp.
Disconnect the relay point from the selector lever lever.
3. Disconnect the selector lever boot (2) from the bulkhead.
Installation Procedure
Important: Push the lever boot onto the gearshift rod without twisting it.
1. Attach the selector lever boot (2) to the bulkhead.
Important: Do not tighten the clamping screw (1).
2. Attach the transmission relay point to the selector lever.
