Astra L4-1.8L (2009)
3. Attach the selector lever (2) to the selector lever shaft.
Tighten the nut (1) to 16 Nm (12 lb ft).
4. Adjust the selector lever position switch. Refer to Transmission Range Switch Adjustment (See: Adjustments).
5. Tighten the 2 bolts and the transmission range switch on the transmission.
Tighten the 2 bolts to 25 Nm (18 lb ft).
6. Attach the selector cable (2) to the selector lever.
7. Attach the wiring harness plug (1) to the selector lever position switch.
Attach the wiring harness plug and lock (arrow),
8. Install the left engine mount. Refer to Transmission Mount Replacement - Left Side (See: Automatic Transmission/Transaxle/Transmission
Mount/Service and Repair).
9. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).