Astra L4-1.8L (2009)
10. Remove window regulator.
Disconnect wiring harness plug.
Installation Procedure
1. Insert the window regulator.
Connect the wiring harness plug.
2. Install the window regulator.
Rivet on 6 blind rivets.
Note: Raise the window and simultaneously tilt the window forwards.
3. Install front door window.
1. Position the window downwards.
2. Install window in window regulator guide.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Guide the window so in position that the fastening bolts align with the mounting holes. Fasten front door window.
4. Install the front door window and tighten the 2 bolts to 7 Nm (62 lb in).
1. Install the window winder arm in the window channel.
2. Guide the window upwards and place evenly in weatherstrip and tighten the 2 bolts to 7 Nm (62 lb in).
5. Position the rear window channel.
6. Install the rear window channel.
Rivet on 2 blind rivets.
7. Install belt outer sealing strip.
1. Install fastening clip on the outer window frame.
2. Install in window channel weatherstrip in the window channel bracket.
3. Install the window channel weatherstrip onto the door folding.
8. Install the water vapor barrier.
1. Install 2 holding angles.
2. Install 2 pins.
9. Install the front side door trim panel. Refer to Front Side Door Trim Panel Replacement (Coupe) (See: Body and Frame/Doors, Hood and
