Astra L4-1.8L (2009)
Note: Keep the cutting edge of the tool against the window. Do this from inside the vehicle.
9. If necessary, use a long utility knife or similar tool to remove the bottom corners of the windshield from the urethane adhesive.
10. With the aid of an assistant (2), remove the windshield (1) from the vehicle.
Installation Procedure
1. Install the windshield into the opening. Refer to Adhesive Installation of Windshields (See: Adhesive Installation of Windshields).
2. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement (See: Body and Frame/Mirrors/Service and Repair/Inside Rearview
Mirror Replacement).
3. Install the interior windshield pillar garnish moldings. Refer to Windshield Garnish Molding Replacement (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair).
4. Install the air inlet screen. Refer to Air Inlet Screen Replacement (See: Heating and Air Conditioning/Air Duct/Service and Repair/Air Inlet
Screen Replacement).
5. Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper
Arm/Service and Repair/Windshield Wiper Arm Replacement).
6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
7. Close the hood.
