Astra L4-1.8L (2009)
Warning
Failure to prep the area prior to the application of primer may cause insufficient bonding of urethane adhesive. Insufficient bonding of urethane adhesive
may allow unrestrained occupants to be ejected from the vehicle resulting in personal injury.
Note: Do not apply the black #3 primer to the existing bead (1) of the urethane adhesive on the pinch-weld flange. Apply the primer only to nicks,
scratches or the primed surfaces.
7. Shake the pinch-weld primer black #3 for at least 1 minute.
8. Use a new dauber in order to apply the primer to the surface of the pinch-weld flange (1).
9. Allow the pinch-weld primer to dry for approximately 10 minutes.
Caution: Do not use spacers when installing a windshield. The stress caused by the spacers may damage the windshield.
10. Install the VIN plate filler strip (1) to the windshield (2), if equipped.
11. Install the new windshield acoustic strip (1) to the windshield (2), if damaged.
The acoustic strip aids in reducing noise.
12. If window reveal molding is damaged it must be replaced, start in the center and work toward each end pressing firmly into place.
