Aura L4-2.4L (2008)
1. Place the engine mount onto the side rail studs.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the engine mount to side rail bolts (2).
Tighten the bolts to 50 N.m (37 lb ft).
Important: The engine mount to bracket bolts must be hand started. Do not pry the engine mount to align the holes.
3. Install the engine mount to bracket bolts (1).
Tighten the bolts to 50 N.m (37 lb ft).
4. Remove the hydraulic floor jack from under the oil pan.
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (1st Design) (See: Tune-up and Engine Performance Checks/Air
Cleaner Housing/Service and Repair)Air Cleaner Assembly Replacement (2nd Design) (See: Tune-up and Engine Performance Checks/Air
Cleaner Housing/Service and Repair).
