Aura L4-2.4L Hybrid (2009)
4. Position the upper plenum panel to the vehicle using 3-dimensional measuring equipment. Clamp the panel in place.
5. Plug weld accordingly.
6. Clean and prepare all of the welded surfaces.
7. Install all of the related panels and components.
8. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair ().
9. Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems (See: Paint, Striping and Decals/Paint/Application and ID/Basecoat/Clearcoat
Paint Systems).
10. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LAT) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (LZ4, LY7, and LE5) (See: Starting
and Charging/Battery/Battery Cable/Service and Repair).
11. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming
and Disarming/Service and Repair).