Aura L4-2.4L Hybrid (2009)
4. Remove the brake pads (1) from the brake caliper bracket.
5. Remove the brake pad retainers (2) from the brake caliper bracket (3).
6. Remove the brake caliper bracket bolts (2).
7. Remove the rear brake caliper bracket.
8. Inspect the brake mounting and hardware. Refer to Rear Disc Brake Hardware Replacement (See: Service and Repair/Rear Disc Brake Hardware
Replacement).
9. Inspect the brake caliper bracket.
10. Replace the brake caliper bracket if cracked or damaged.
Installation Procedure
1. Install the brake caliper bracket.
Caution: This is a self-retaining fastener joint that does not require thread locking compounds. Do not attempt to clean the threads with a
standard tap. If a standard tap is used, damage to the joint threads will occur.