Aura L4-2.4L Hybrid (2009)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Replacement
Tools Required
J 42067 Rear Main Seal Installer
Removal Procedure
1. Remove the flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair).
Important: Do not damage the outside diameter of the crankshaft or chamber with any tool.
2. Pry out the crankshaft rear oil seal using a flat-bladed tool.
Installation Procedure
1. Using the J 42067 , install a NEW crankshaft real oil seal.
2. Install the flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair).
