saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Front Subframe|Service and Repair|Page 8981 > < Steering - Front End Clunk/Rattle/Knock On Bumps|Page 8976
Page 1
background image

Front Subframe: Service and Repair

Frame Replacement (2.4L)

Special Tools

J 39580  Engine Support Stand

Removal Procedure

1. Install the engine support fixture. Refer to Engine Support Fixture   (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and

Replacement/Engine Support Fixture).

2. Support the radiator and condenser from above using the condenser tabs on each side.
3. Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle   (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
4. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation   (See: Wheels and Tires/Service and Repair).
5. Remove the front fender liner. Refer to Front Fender Liner Replacement   (See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service

and Repair).

6. LE5 only, remove the front catalytic converter. Refer to Catalytic Converter Replacement (LAT)   (See: Engine, Cooling and Exhaust/Exhaust

System/Catalytic Converter/Service and Repair)Catalytic Converter Replacement (LE5 With MH8)   (See: Engine, Cooling and Exhaust/Exhaust
System/Catalytic Converter/Service and Repair).

7. Remove the engine splash shields. Refer to Engine Splash Shield Replacement   (See: Body and Frame/Splash Guard/Service and Repair/Engine

Splash Shield Replacement) , Engine Splash Shield Replacement - Left Side (LAT)   (See: Body and Frame/Splash Guard/Service and
Repair/Engine Splash Shield Replacement - Left Side)Engine Splash Shield Replacement - Left Side (LY7)   (See: Body and Frame/Splash
Guard/Service and Repair/Engine Splash Shield Replacement - Left Side) and Engine Splash Shield Replacement - Right Side (LAT and LE5)   (
See: Body and Frame/Splash Guard/Service and Repair/Engine Splash Shield Replacement - Right Side)Engine Splash Shield Replacement -
Right Side (LY7)   (See: Body and Frame/Splash Guard/Service and Repair/Engine Splash Shield Replacement - Right Side).

8. Remove the lower ball joints from the steering knuckles. Refer to Lower Control Arm Replacement   (See: Control Arm/Service and Repair/Front

Suspension).

9. Remove the tie rod ends from the steering knuckles. Refer to Steering Linkage Outer Tie Rod Replacement   (See: Steering/Tie Rod/Service and

Repair/Steering Linkage Outer Tie Rod Replacement).

Front Subframe|Service and Repair|Page 8981 > < Steering - Front End Clunk/Rattle/Knock On Bumps|Page 8976